Can you bridge two routers

Alternatively, a second router can be configured as an Ethernet network switch or—if wireless—an access point. This arrangements lets devices connect to the second router as usual but does not create a subnetwork. For households that want to extend basic internet access plus enable file-and-printer sharing to additional computers, a no-subnetwork setup is sufficient, but it requires a different configuration procedure than given above.

To set up a new router as a network switch, plug an Ethernet cable into any free port of the second router other than the uplink port and connect it to any port of the first router other than the uplink port.

To set up a new wireless router as an access point, configure the device for either bridge or repeater mode linked to the first router. Consult the documentation for the second router for the specific settings to use. For both wired and wireless routers, update the IP configuration:. Actively scan device characteristics for identification. Use precise geolocation data. Select personalised content. Create a personalised content profile. Measure ad performance. Select basic ads. Create a personalised ads profile.

Select personalised ads. Apply market research to generate audience insights. Measure content performance. Develop and improve products. Remember that the settings of each router can vary drastically depending on the manufacturer and model. Once these changes have been saved, log out of the router and disconnect your computer from it. That is all of the work completed on the primary router. Connect and login to the second router as you did with the first and navigate to the screen that allows you to set the IP address of the router itself.

Once the IP address is set, just make sure that the subnet mask matches that of the primary router and that you disable UPnP if the option is there.

This is easily done by setting the primary router to use any channel between 1 and 6 and then setting the second router to use channel Make sure to save changes, log out and disconnect the router from your computer as it is now time to place both routers where you need them. Just remember, you will need to use an Ethernet cable to connect the two together.

Regardless of which network setup you are using, the routers need to connect to each other, but the port you must use will differ. Once connected, you have successfully connected to a second router to your home network using a wired connection.

Before going down the route of setting up the second router wirelessly, you will first make sure that it is even possible using the equipment you have. Make sure the router is first connected to your modem via an Ethernet cable if you have one, then connect the computer you are using to the router using a separate Ethernet cable. Unless you have previously changed the username and password to access the router, which is recommended for security purposes, the router will often ship with a card containing these credentials.

Now it is time to connect the second router to your computer using an Ethernet cable, logging in and opening the configuration page. The router does not need to connect to the modem if you have one as a separate device at this stage. For example, if the primary router has a DHCP range of Therefore, you need to know what you are trying to achieve and get clear on what you expect from each device.

For example; do you want to extend your WiFi range, partition your network into subnets, or bridge two networks together? And, how will these two routers be connected, with an Ethernet cable, or over a wireless bridge? Using an Ethernet cable is the easiest way to connect two routers. TIP: It is not recommended to run Ethernet cable in excess of meters feet when connecting two routers.

There are a number of ways to connect two routers. Read Answer How do I enable remote management for my router? Read Answer How do I login to my router? Read Answer How do I open ports for routers? Read Answer. How do I set up and secure my wireless connection? Read Answer How do I set up website filter on my router?

Read Answer How many simultaneous users can my Wi-Fi network handle?